-
Q.
How much vacuum power does the Web Buster deliver?
A. Because the Web Buster attaches to your vacuum
hose with a rubber seal (a very easy task), there is no vacuum lost by
leaks, unlike wands that push onto your vacuum hose.
-
Q.
Why can't I just use the tubes that come with my vacuum?
A. Most tube extensions that come with your vacuum
are short extensions that press together to reach a length of
about 4 feet. Usually, that amount of extension is too
little to reach vaulted ceilings and gable eves. Plus,
since those extensions push together (instead of sealing)
vacuum is allowed to leak at each joint. The more of those
extensions you use, the less vacuum that reaches the business
end of the wand. The Web Buster makes an air tight seal on
the hose and has no points of leakage so all the vacuum power is
delivered to the end of the wand.
-
Q. Why
use one long wand instead of one that is assembled in sections?
A. Extensions that come with the vacuum are usually
too short to reach high places and must be assembled in
sections. The sections tend to leak vacuum because they are not
an air tight seal. Vacuum is more likely to be lost along the way in
a long extension. Because of this, Web Buster
has taken great steps to ensure no loss of vacuum.
-
Q.
Will it fit my vacuum?
A. Yes, or your money back. A vast majority of
vacuums use the same size hose ends. Plus, the unique seal in
the tightening ring adjusts as the ring is tightened,
sealing around all manufacturer's hoses tested. The maximum
outside diameter that will fit is 1 5/16 inches.
-
Q.
How do I attach the Web Buster to my vacuum?
A. The Web Buster attaches to your vacuum hose by
inserting your manufacturer's hose into the Web Buster. To make sure the fit
is air tight, you simply tighten the ring clockwise
after inserting the hose end. You know it is
tight enough when you cannot easily pull the vacuum hose out of the Web
Buster. To remove, simply loosen the ring and remove the hose.
Click here to see a picture of how the tool is attached.
-
Q.
Isn't it Heavy? Won't I have trouble lifting it?
A. No. The Web Buster is made from strong but light
PVC plastic. It is surprisingly light and easy to handle with
one hand.
-
Q.
What if I知 not completely satisfied with my Web Buster?
A. If you aren稚 completely satisfied with the Web
Buster you may return it within 30 days of purchase for a complete
refund of the purchase price.
Go to the Contact page and make arrangements with the sales
department to return it.
-
Q.
If a Web Buster falls down in the closet and nobody hears it,
does it make a sound?
A. Philosophically, the Web Buster will not make a
sound by itself. It must be attached to your vacuum.
